Universal Electronics OCAP 5 Manual do Utilizador descarregar pdf (Página 15)

www.urcsupport.com/atlasocap

Now, regardless of what mode you select (except AUD),

the channel keys will only change channels on your cable

converter.

CHANGING VOLUME LOCK

Volume Lock allows you to control the volume through

the device identified as having your primary speaker(s),

regardless of which mode you are using. On the Atlas

OCAP 5-Device Remote Control, Global Volume Lock is

set to TV, so you can control TV volume while in the VCR,

DVD, TV or CBL mode. You can perform Individual

Volume Unlock on a selected device to set its volume

control for independent operation.

NOTE: The audio mode’s (AUD) volume controls are

active regardless of Volume Lock settings.

However, if you lock the volume controls to

the AUD mode, you will have control of the

audio device’s volume in all other modes (i.e.,

VCR, DVD, TV, and CBL). This can be an advan-

tage if, for example, you always listen to home

entertainment devices through your receiver’s

speakers.

Unlocking Volume Control for a Single Device

(Individual Volume Unlock)

4. Repeat steps 1 through 3 for each device you

want volume to be unlocked.

Now, after you select a device that has volume unlocked

(e.g., CBL), pressing VOL+, VOL-,or MUTE, will control

only that device’s volume.

3. Press CH+ once. The CBL key will blink twice.

1. Assuming Global Volume Lock is active, select

a mode on the remote control that you want to

unlock (e.g., CBL) and press it once. Next,

press and hold SETUP until the device key

blinks twice.

2. Enter 9 9 3. The last-selected device key will

blink twice.

3. Press VOL- once. The last-selected device key

will blink four times.

Atlas OCAP M1056.fm Page 15 Tuesday, March 24, 2009 4:45 PM

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 87 88

Sem comentários

Universal Electronics OCAP 5 Manual do Utilizador Página 15