Universal Electronics CRICKET Ficha Técnica descarregar pdf (Página 22)

2020

Home

This code lock may be used to switch an alarm (e.g.car alarm K3504) on and off, or to

open a door lock. An LED on the operating panel indicates the position of the ‘lock’.

• The code is easy to define.

• Because the operation panel is completely enclosed, it may be used inside and

outside the house.

• more than 3000 codes (4 digits)

• relay output: 5A / 220V

• time limit for code entry: ± 5 seconds

• power supply: 9 - 15VDC or 8 - 12VAC

• power consumption:

•output on: 40mA

•output off: 0.3µA

• dimensions:

• front panel: 80 x 80mm / 3.2 x 3.2”

• depth: 40mm / 1.6”

K8027

This switching mounted can be plugged into

our K8006 base unit.

• Can be used to switch lamps or other

domestic loads.

• To be controlled via push buttons,

switches or one of our control mounteds

or kits such as the K8046, K8055,

K8061, K8000 PC interface, etc...

• (50/60Hz)

• max. load: 2.5A (275W/110V -

575W/230V)

• dimensions: 65 x 57 x 25mm / 2.6 x

2.2 x 1”

Innovating and impressive code lock. Impossible to determine the pressed

keys due to the use of digital rotary encoder. codelock with rotary encoder and

7-segment display. 4-digit code. several operating modes. adjustable pulse

duration. application examples: . open a door, gate, fence…. arm / disarm your

alarm system. prevent unauthorized use (mode 3) of car, entertainment systems,

computers, machinery…

relay output NO/NC: 3A / 24VDC max.

• power supply: 12VDC / 100mA max.

• Dimensions:

• front: 85 x 85mm / 3,35 x 3,35”

• mounting depht: 45mm / 1,77”

Create your own domestic modular light control system.

• For use with optional plug-in mounted K8007 /K8037, plug-in timer mounted K8008 or plug-

in slow-on/slow-off mounted K8029.

• Bus system holds up to five plug-in units.

• Optically insulated push button inputs.

• Can be controlled with open collector circuits (ex.K8000 /K8055/ K8061 computer interface

card, with IR remote control receiver K8050 or with K8023).

• Local control pushbuttons included.

• LED power and mains indicator.

• LED operation indicator for each channel.

• Low-voltage (24VAC) control circuit for extra safety.

• Each plug-in slot is fused.

• Includes 10 LEDs for pushbutton illumination.

• A custom enclosure for rail mounting is available (B8006).

• 5 separated channels

• maximum output: 2.5A per channel (fuse protected)

• push button control current: 150mA

• open collector control current: 35mA DC

• power supply: 24VAC / 300mA

• supply voltage for mounteds: 110V to 240VAC

dimmer to be used in our K8006 home light system. suitable

for incandescent lamps, mains voltage halogen lighting and low

voltage halogen lighting in combination with a conventional (wire

wound) transformer. easy pushbutton operation. a brief push

toggles on/off, while continued pushing engages dimming action.

non volatile memory for last set light intensity. lots of safety features

to make lamps last longer, such as “soft-start” and automatic

deactivation after 12 hours or after 20 min at insufficient intensity

.... transformer protection in case of defective light sources. LED

status indication. replaces K8007

suppression of radio & TV interference according to EN55015

• operating voltages: 110-125V or 220-240V AC (50/60Hz)

• max. load: 350W/230V or 170W/115V

• max. phase shift with inductive load: 30°

• dimming speed: ± 5 sec.

• PCB dimensions: 65 x 57 x 25mm / 2.6 x 2.3 x 1”

K8006

KANALEN

K8037

For use with K8006 bus system.

Microprocessor controlled.

• Dualmodeoperation:•Slowon/Slowoffdimmer

with two independent and programmable delays.

• Dimming direction changes with each key press.

• Manual level control is possible.

• This mode also simulates a ‘regular’ dimmer.

• * Light is turned on at full power for a programmable

time, after which it slowly fades to zero, also during a

programmable time.

• for use with the Velleman home modular light system K8006

• 2 programmable delays ranging from 1s to 1h

• no memory loss in case of power failure

• ‘soft-start’ function that prolong the life of the bulbs

• AC power: 110-125 or 220-240VAC 50/60Hz

• max. load: 1.3A (150W / 120V - 300W / 230V)

• dimensions: 67 x 57 x 25mm / 2.7 x 2.3 x 1.4”

• not suited for use with low voltage halogen lighting or electronic

transformers

14 different functions including timers,

switching, flashing, interval, random

switching...

• Two pre-programmed delays.

• Learning mode for delays of 2 sec. up

to 12 days.

• Pushbutton control (with home modular light

system K8006).

• EEPROM for delay time storage in case of power failure.

• On-board transient filter for relay contacts or load (selectable).

• Suitable for control of incandescent lighting, halogen lighting,

fluorescent lighting, fans, valves, buzzers...

• also available as stand-alone version: K8015

• operational voltages: 110-125 or 220-240Vac 50/60Hz

• max. load: 2.5A (550W / 220V ; 275W / 110V)

• dimensions: 65 x 57 x 25mm / 2.6 x 2.2 x 1”

K8008

K8029

K8068

K8082

K6400

Code lock

K8029

Slow on-off dimmer

K8006

Domotica light system bus-pcb

K8037

Bus dimmer for home modular light system

K8082

“safe”-style code lock

K8027

Relay output mounted for k8006

K8068

Dimmer for electronic

transformers

K8008

Multifunction relay

mounted

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 51 52

Comentários a estes Manuais

Sem comentários

Universal Electronics CRICKET Ficha Técnica Página 22

Comentários a estes Manuais

Manuais e produtos relacionados com Controlos remotos Universal Electronics CRICKET